Warm dry weather conditions increase the risk of properties suffering from Structural Defects causing the Masonry and Brickwork to crack as the clay beneath properties dries it shrinks.
Newman’s have once again been called upon by Oxford City Council to carry out Structural Surveys to a number of properties and structures.
This block of four garages is suffering from a large number of substantial cracks within the masonry due to movement of the concrete floor slab, the garages have been monitored for a period of 18 months and there has been no further on-going movement.
Newman’s have been asked to put together a structural repair scheme using the Twistfix Helical System, our design will include Twistfix masonry beams and crack stitches as well as repairs to the concrete floor slab.
This large block of garages is also suffering from cracked brickwork and has also slipped off its DPC (damp proof course) due to no movement joints being present, Newman’s will again design a scheme to include Twistfix crack stitches and Twistfix retro fit movement joints, where the brickwork has slipped of the DPC localised areas will be rebuilt.
Finally this block of flats requires repairs to its balconies, our design will include the Weber concrete repair system and the Vulkem balcony repair system, all of the above projects will be available on the case study section of the website soon.
To find out how Newman’s can help with your Concrete and Masonry Repairs contact our head office on0333 444 0154 or email enquiries@newmans.com
Structural Repairs and Concrete Repairs are often under-looked as a specialist trade with many companies and DIY enthusiasts just having a go…
Even specialist companies within the structural repair industry incorrectly install structural repair products which then become defunct and in some instances cause more damage than good.
Here’s a few examples where Newman’s have been called in to rectify works installed incorrectly.
This picture below is an example of a 9mm helical tie which was supposed to be tying the front elevation of a Victorian commercial property on a busy high street which was bowing outwards. You can visit our case study here to view the Newman solution.
This picture is of a concrete repair which was carried out by a builder using a weak sand cement mix to reinstate the structural integrity of the concrete supporting beam which had failed due to corrosion of the reinforcing steel within the concrete.
And this is a crack repair carried out apparently by a reputable contractor who are associated with a ‘leading manufacturer’ in the South West, (we won’t name and shame), where instead of using a helical bar encompassed in reinforcement grout such as that we use supplied by Twistfix instead a 6mm galvanised steel rod was inserted into the bed joint and simply pointed over.
Always use a specialist with a good reputation who can supply references and case studies of previous work and supply genuine insurance backed guarantees.